on the market, you can get many kinds of moldings: plastic, wood and MDF 'u. Moldings can be colored panel, contrasting, or a completely different color. The hardest thing to choose the strips to the panels of the structure other than wood, ie: marble, granite, moldings, etc. fragmento usually mounted on the glue, screws or staples. The difference is that the glue and staples do not see a screw that. Screws used for large uneven walls, in Polish conditions very often. The best and fastest way is through the buckle, but there needed to be adapted to the terminal clamps (with equal walls). The glue is cheaper than staples, but it is harder to fixed. The choice I leave to you.
Assembly strips with staples: The kit consists of clips, dowels and plaque mounting bracket at a right angle to the wall. Strips must be specially prepared for this type of installation: they must have slots into which plugs into the buckle. (Details on the installation will present you with vendor).
assembly by adhesive strips: Cut the strips and match them to the walls. The finished strip and the wall we put glue and distribute on the surface. You have to wait until it thickens a little glue and attach bracket to the wall. Hold a moment and repeat this operation with each strip. In fact, it does not paint such a rosy, usually end up screwing some of the most resistant strips with screws .. Groove on the back of the bar (after the visible part) can be used to cover such cables. For this purpose, you can not use the expansion of cracks!
Instead of a traditional cross slats can also use higher - pedestals, but it also depends on the size of the room and of course the taste.
Assembly strips with staples: The kit consists of clips, dowels and plaque mounting bracket at a right angle to the wall. Strips must be specially prepared for this type of installation: they must have slots into which plugs into the buckle. (Details on the installation will present you with vendor).
assembly by adhesive strips: Cut the strips and match them to the walls. The finished strip and the wall we put glue and distribute on the surface. You have to wait until it thickens a little glue and attach bracket to the wall. Hold a moment and repeat this operation with each strip. In fact, it does not paint such a rosy, usually end up screwing some of the most resistant strips with screws .. Groove on the back of the bar (after the visible part) can be used to cover such cables. For this purpose, you can not use the expansion of cracks!
Instead of a traditional cross slats can also use higher - pedestals, but it also depends on the size of the room and of course the taste.
Source: http://poradniki.dom.pl/?p2=1179&p3=1304&sekcja=Monta% BF & Tit = Installation% BF_listew.html
0 comments:
Post a Comment