selection of wooden flooring on the market may be a headache. The prospective investor must consider the aesthetics and properties of wood, but also take into account the structure of the floor and the way it is fitting. Significant for the domestic cost of the investment budget leaves no room for mistakes, so it is important to contact the seller and the information that we obtain from him before making a purchasing decision. The following seven questions for the seller to help you make the right choice and assembly planning.
important quality when buying for years.
first What is the manufacturer? Good references
manufacturer is a guarantee of high quality raw material and technology. This is particularly important in the case of wooden floors. The conditions of storage, drying and Quarantine has already finished product are important for the quality of service floor. Floor with poor humidity can cause problems by over-work of wood and the formation of unsightly cracks. Modern technological line provides precision bonding joints individual items. Conditions of production floor reflects its warranty, the length of the best producers of up to 30 years (barlinecka board, Barlinek SA).
oak, beech, and perhaps a better deck?
second What are the parameters of the selected timber?
choice of wood is not only a decision as to the aesthetics of the floor, but also its durability. Each species has specific technical parameters. For most floors are resistant to abrasion and dents and to changes in temperature and humidity. Therefore, it is worth noting the nature of the room in which to be installed floor and to predict the intensity of its future operation. To areas with high traffic, such as living rooms, are recommended for floors made of hardwood such as beech, oak, ash and hornbeam. Cheaper usually the species with lower parameters - maple, birch, alder - will suffice as a floor in the bedrooms. What's more, these two species exhibit strong characteristics of ionizing radiation, as well as protect against the effects of watercourses. In the case of premises and sites heavily used, such as hallways, corridors or stairs, you should invest in a very hard exotic wood. Especially recommended are here: deck, badi, Bubinga, Padouk and merbau.
If you do not want to combine different types and colors of wood (other in the hall, while others open to the living room) or invest in exotic wood, choose a board barlinecka line Professional or Exclusive. They have a factory-made to cover the new generation of coatings increased, compared to standard coatings, resistance to abrasion and mechanical damage.
What we choose, and what do we get?
third What is the guarantee of color floor?
Wood is a natural material, which according to from the place of growth and climatic conditions prevailing at any given time can take different colors within the same species. Therefore, our floor may differ from the color samples seen in the store. The more so that the latter is exposed to light, which causes darkening of the timber or may be subjected to restoration, which also affects the color.
safest choice in this respect, the factory floor are painted and oiled. Presented in the shops are covered with impregnated samples (oil, paint), with identical composition and performance technique, which we have at home.
Today, Tomorrow or per month?
4th How is the availability of the floor?
Our dream floor is not always available immediately. Problem is especially exotic species, as well as in terms of grain selekcjonowanych or refined native species. You might check the time before we will have to wait for weeks. In the case of recognized producers, they always have stocks of the most popular species such as beech, oak and ash. In favor of the buyer also works is that their floors are sold in many retail outlets, which stocks will vary. Therefore, if your floor is not available in one store, it does not mean that it is not different in our city. In the case of Barlinek list of sales outlets is available on the website of the company.
Assembly for 2 days or 2 weeks?
5th How long does the naturalization floor in an apartment?
purchased (must be packed), the floor has to go through a period of acclimation before installation in the room destination. During this time, takes over the degree of humidity and ambient temperature, thereby reducing the "work" (zsychanie or swelling) after positioning. The length depends on the acclimation construction of floors and time of year and can have a significant impact on the time of the whole assembly. Short - 48 hours - laminated flooring require acclimation, such as a board barlinecka. Used in it: cross-layer arrangement relative to each other, (non-adhesive) barclick snap connector that connects the individual boards and the optimal thickness of the floor (15 mm), allow for the effective removal of the natural stress of wood. For these same reasons, the thick solid floor, with large elements, require a longer acclimation. Her time is increased for periods of autumn and winter, which carry a risk of large changes in temperature and humidity.
assembly more expensive than the floor?
6th What is the cost of installation?
solid flooring installation can be demanding. Few people realize how many of the actions required, and that it may be, therefore, extends over time up to several weeks. The basic steps are: priming the spout, the arrangement and glue the floor, the scraping and priming and painting, and usually double the final rib. The cost of materials for assembly is typically about 50% of the floor. It varies However, depending on the price of wood (cheaper native species and exotic expensive) as well as the size of the floors (parquet flooring and wide plank solid long they need more expensive, stronger bonding glue). The high cost of chemicals for the installation and service - often more than twice the price of the raw material - also applies to industrial parquet.
In the case of the sandwich floor looks much simpler, faster and is also less expensive. Floor, such as a board barlinecka have finished pre-ible layer (oil or varnish) so that no need to buy the above impregnation and scrape and fill the surface. The design allows the installation of the floor in the "floating" without the use of glue, which gives additional savings. Lower labor costs are also mounting team, which non-adhesive positioning boards and rails, in a room of 30 m2, performed within 1-2 days. After installation you can immediately proceed to the installation of furniture.
Barlinek design boards and its optimum thickness - 15 mm - also predispose her as cover on the underfloor heating, which was confirmed in several months, specialist tests.
Who will do it well?
7th Does the shop have good editors?
best quality wood, not defend itself against the mounting crew incompetence. Her responsibilities include not just the position of the floor, but may check screed moisture before assembly, which is particularly important in new buildings. If you set it too high, the floor can not be mounted under the risk of distortion. Tolerance of the moisture content varies depending on the method of installation. When laying the boards Barlinek in a "floating" (using a foil vapor barrier) acceptable level is about 3%. However, in the traditional solid flooring installation (by sticking to the ground), it can not have more than 2%. Employment
the sales team is a guarantee of the annual warranty and usually save money. Shop, earning the materials for assembly, will be more willing to offer a lower rate for the service.
decision to choose hardwood floors because of the different types of construction and performance of each species, presents a real challenge. Take advantage of expert knowledge, asking him the right questions. Reputable the manufacturer is a guarantee of high quality raw material, performance flooring, as well as its installation and service. Comfort and reliability are particularly important when buying a product not a year or two, but the decades, as is the case with wooden floors.
source: http://www.meble.pl
0 comments:
Post a Comment